I'm looking forward to the model.toVHDL() method in PyTorch.

They mentioned that they using strong quantization (iirc 3bit) and that the model was degradeted from that. Also, they don't have to use transistors to store the bits.

Whats the theoretixal full wafer scale model they could produce?

As scary as it sounds today, a lightning-quick zero latency non-networked local LLM could provide value in an application like a self-driving car. It would be a level below Waymo's remote human support, so if the car couldn't figure out how to deal with a weird situation, it could ask the LLM what to do, hopefully avoiding the need to phone home (and perhaps handling cases where it couldn't phone home).

latency and control, and reliability of bandwidth and associated costs - however this isn't just the pull for specialised hardware but for local computing in general, specialised hardware is just the most extreme form of it

there are tasks that inherently benefit from being centralised away, like say coordination of peers across a large area - and there are tasks that strongly benefit from being as close to the user as possible, like low latency tasks and privacy/control-centred tasks

simultaneously, there's an overlapping pull to either side caused by the monetary interests of corporations vs users - corporations want as much as possible under their control, esp. when it's monetisable information but most things are at volume, and users want to be the sole controller of products esp. when they pay for them

we had dumb terminals already being pushed in the 1960s, the "cloud", "edge computing" and all forms of consolidation vs segregation periods across the industry, it's not going to stop because there's money to be made from the inherent advantages of those models and even the industry leaders cannot prevent these advantages from getting exploited by specialist incumbents

once leaders consolidates, inevitably they seek to maximise profit and in doing so they lower the barrier for new alternatives

ultimately I think the market will never stop demanding just having your own *** computer under your control and hopefully own it, and only the removal of this option will stop this demand; while businesses will never stop trying to control your computing, and providing real advantages in exchange for that, only to enter cycles of pushing for growing profitability to the point average users keep going back and forth

The network latency bit deserves more attention. I’ve been trying to find out where AI companies are physically serving LLMs from but it’s difficult to find information about this. If I’m sitting in London and use Claude, where are the requests actually being served?

The ideal world would be an edge network like Cloudflare for LLMs so a nearby POP serves your requests. I’m not sure how viable this is. On classic hardware I think it would require massive infra buildout, but maybe ASICs could be the key to making this viable.

Id assume the next step is a small reasoning model would demo whether inference speed can fill some intelligence gaps. Combine that with some RAG to see if theres a tension in intrinsic reason or pattern recognition.

I believe this is a CPU/GPU vs ASIC comparison, rather than CPU vs GPU. They have always(ish) coexisted, being optimized for different things: ASICs have cost/speed/power advantages, but the design is more difficult than writing a computer program, and you can't reprogram them.

Generally, you use an ASIC to perform a specific task. In this case, I think the takeaway is the LLM functionality here is performance-sensitive, and has enough utility as-is to choose ASIC.

Doesn't Google have custom TPUs that are kind of a halfway point between Taalas' approach and a generic GPU? I wonder if that kind of hardware will reach consumers. It probably will, though as I understand them NPUs aren't quite it.

"This has been demonstrated already…"

I think burning the weights into the gates is kinda new.

("Weights to gates." "Weighted gates"? "Gated weights"?)

It's not certain this is the future: the obvious trade off is lack of flexibility: not only when a new model comes out, but also varying demand in the data centers - one day people want more LLM queries, another day more diffusion queries. Aaand, this blocks the holly grail of self improving models, beyond in-context learning. A realistic use case? More efficient vision based drone targeting in Ukraine/Taiwan/ whatevers next. That's the place where energy efficiency, processing speed, and also weight is most critical. Not sure how heavy ASICS are though, bit they should be proportional to the model size. I heard many complaints about onboard AI 'not being there yet', and this may change it. Not listing middle east as there is no serious jamming problem there.

I'd be kind of shocked if Nvidia isn't playing with this.

I don't expect it's like super commercially viable today, but for sure things need to trend to radically more efficient AI solutions.

Are people surprised?

I think the interesting point is the transition time. When is it ROI-positive to tape out a chip for your new model? There’s a bunch of fun infra to build to make this process cheaper/faster and I imagine MoE will bring some challenges.

Job specific ASICs are are “old as time.”

> Because we did this exact same transition from running in software to largely running in hardware for all 2D and 3D Computer Graphics.

We transitioned from software on CPUs to fixed GPU hardware... But then we transitioned back to software running on GPUs! So there's no way you can say "of course this is the future".

> I'm curious why this isn't getting much attention from larger companies.

I can see two potential reasons:

1) Most of the big players seem convinced that AI is going to continue to improve at the rate it did in 2025, if their assumption is somehow correct by the time any chip entered mass production it would be obsolete.

2) The business model of the big players is to sell expensive subscriptions, and train on and sell the data you give it. Chips that allow for relatively inexpensive offline AI aren't conducive to that.

Apple should have done this yesterday. A local AI on my phone/Macbook is all I really want from this tech.

The cloud-based AI (OpenAI, etc.) are todays AOL.

Well even programmable ASICs like Cerebras and Groq give many-multiples speedup over GPUs and the market has hardly reacted at all.

> I'm curious why this isn't getting much attention from larger companies.

Time is money and when you're competing with multiple companies with little margin for error you'll focus all your effort into releasing things quickly.

This chip is "only" a performance boost. It will unlock a lot of potential, but startups can't divide their attention like this. Big companies like google are surely already investigating this venue, but they might lack hardware expertise.

That slot is called USB-C. I can fully imagine inference ASICs coming in powerbank form factor that you'd just plug and play.

That's the kind of hardware am rooting for. Since it'll encourage Open weighs models, and would be much more private.

Infact, I was thinking, if robots of future could have such slots, where they can use different models, depending on the task they're given. Like a Hardware MoE.

This is what I've been wanting! Just like those eGPUs you would plug into your Mac. You would have a big model or device capable of running a top-tier model under your desk. All local, completely private.

A cartridge slot for models is a fun idea. Instead of one chip running any model, you get one model or maybe a family of models per chip at (I assume) much better perf/watt. Curious whether the economics work out for consumer use or if this stays in the embedded/edge space.

Would somewhat work except for the power usage.

I doubt it would scale linearly, but for home use 170 tokens/s at 2.5W would be cool; 17 tokens/s at 0,25W would be awesome.

On the other hand, this may be a step towards positronic brains (https://en.wikipedia.org/wiki/Positronic_brain)

Yeah maybe you can call it PCIe.

For comparison I wanted to write on how Google handles MoE archs with its TPUv4 arch.

They use Optical Circuit Switches, operating via MEMS mirrors, to create highly reconfigurable, high-bandwidth 3D torus topologies. The OCS fabric allows 4,096 chips to be connected in a single pod, with the ability to dynamically rewire the cluster to match the communication patterns of specific MoE models.

The 3D torus connects 64-chip cubes with 6 neighbors each. TPUv4 also contains 2 SparseCores which specialize handling high-bandwidth, non-contiguous memory accesses.

Of course this is a DC level system, not something on a chip for your pc, but just want to express the scale here.

*ed: SpareCubes to SparseCubes

If each of the Expert models were etched in Silicon, it would still have massive speed boost, isn't it?

I feel printing ASIC is the main block here.

This is exactly what's going to happen. Assuming no civilization-crippling or Great Filter events, anyway. At this point I fail to see how it could go any other way. The path has already been traveled, and governments (along with many other large organizations) will demand this functionality for themselves, which will eventually have a consumer market as well.

Another commenter mentioned how we keep cycling between local and server-based compute/storage as the dominant approach, and the cycle itself seems to be almost a law of nature. Nonetheless, regardless of where we're currently at in the cycle, there will always be both large and small players who want everything on-prem as much as possible.

Is it possible to supplement the model with a diff for updates on modular memory, or would severely impact perf?

and run an outdated model for 3 years while progress is exponential? what is the point of that

It doesn't even need to be high speed. A minimal chip would have four pins: VCC, GND, TX, and RX. Even one-dollar microcontrollers can handle megabit-speed serial connections, which is fast enough for LLM communication.

Probably more like either USB sidecar or PCIe drop in. I dont think theyll return to a world dedicated coprocessors.

Unless someone finds a way to turn these thijgs into a bios module.

Right now I have to wait 10 minutes at a time for the 2+ hour long transcriptions I've uploaded to Voxstral to process. The speed up here could be immense and worthwhile to so many customers of these products.

They declined to say: https://www.eetimes.com/taalas-specializes-to-extremes-for-e...

Except they say it's fully digital, so not an analog multiplier

It frightens me no more than the possibility of building a flawed airplane or a computer that overheats (looking at you, NVIDIA 12-pin) and "never being able to update the HW". Product recalls and redesigns exist for a reason.

If this happens, womp womp, recall the misaligned LLMs and learn from the mistake. It's part of running a hardware business as opposed to a software one.

I can't imagine they'd go for a full production run before at least testing a couple chips and finding issues.

The S in IoT is for security.

2 months of design work is fast, but how much time does fabrication, packaging, testing add? And that just gets you chips, whatever products incorporate them also need to be built and tested.

Yeah, I had written the blog to wrap my head around the idea of 'how would someone even be printing Weights on a chip?' 'Or how to even start to think in that direction?'.

I didn't explore the actual manufacturing process.

Frankly the most critical question is if they can really take shortcuts on DV etc, which are the main reasons nobody else tapes out new chips for every model. Note that their current architecture only allows some LORA-Adapter based fine-tuning, even a model with an updated cutoff date would require new masks etc. Which is kind of insane, but props to them if they can make it work.

From some announcements 2 years ago, it seems like they missed their initial schedule by a year, if that's indicative of anything.

For their hardware to make sense a couple of things would need to be true: 1. A model is good enough for a given usecase that there is no need to update/change it for 3-5 years. Note they need to redo their HW-Pipeline if even the weights change. 2. This application is also highly latency-sensitive and benefits from power efficiency. 3. That application is large enough in scale to warrant doing all this instead of running on last-gen hardware.

Maybe some edge-computing and non-civilian use-cases might fit that, but given the lifespan of models, I wonder if most companies wouldn't consider something like this too high-risk.

But maybe some non-text applications, like TTS, audio/video gen, might actually be a good fit.

LSI Logic and VLSI Systems used to do such things in 1980s -- they produced a quantity of "universal" base chips, and then relatively inexpensively and quickly customized them for different uses and customers, by adding a few interconnect layers on top. Like hardwired FPGAs. Such semi-custom ASICs were much less expensive than full custom designs, and one could order them in relatively small lots.

Taalas of course builds base chips that are already closely tailored for a particular type of models. They aim to generate the final chips with the model weights baked into ROMs in two months after the weights become available. They hope that the hardware will be profitable for at least some customers, even if the model is only good enough for a year. Assuming they do get superior speed and energy efficiency, this may be a good idea.

It could simply be bit serial. With 4 bit weights you only need four serial addition steps, which is not an issue if the weight are stored nearby in a rom.

You still need to do a forward pass per token. With massive batching and full pipelining you might be able to break the dependencies and output one token per cycle but clearly they aren't doing that.

Reading from and to memory alone takes much more than a clock cycle.

FPGAs aren't very power-efficient. You could do it, but the numbers wouldn't add up for anything but prototyping.

You could [1], but it is not very cheap -- the 32GB development board with the FPGA used in the article used to cost about $16K.

[1] https://arxiv.org/abs/2401.03868

I thought about this exact question yesterday. Curious to know why we couldn't, if it isn't feasible. Would allow one to upgrade to the next model without fabricating all new hardware.

FPGAs have really low density so that would be ridiculously inefficient, probably requiring ~100 FPGAs to load the model. You'd be better off with Groq.

The document referenced in the blog does not say anything about the single transistor multiply.

However, [1] provides the following description: "Taalas’ density is also helped by an innovation which stores a 4-bit model parameter and does multiplication on a single transistor, Bajic said (he declined to give further details but confirmed that compute is still fully digital)."

[1] https://www.eetimes.com/taalas-specializes-to-extremes-for-e...

I'd expect this is analog multiplication with voltage levels being ADC'd out for the bits they want. If you think about it, it makes the whole thing very analog.

It might be not that bad. “Good enough” open-weight models are almost there, the focus may shift to agentic workflows and effective prompting. The lifecycle of a model chip will be comparable to smartphones, getting longer and longer, with orchestration software being responsible for faster innovation cycles.

The top comment on Friday's discussion does some math on die size. https://news.ycombinator.com/item?id=47086634

Since model size determines die size, and die size has absolute limits as well as a correlation with yield, eventually it hits physical and economic limits. There was also some discussion about ganging chips.

To those who use AI to get real work done in real products we build, we very much appreciate the value of each token given how much operational overhead it offsets. A bubble pop, if one does indeed happen, would at best be as disruptive as the dot-com bust.

It all depends on how cheap they can get. And another interesting thought: what if you could stack them? For example you have a base model module, then new ones come out that can work together with the old ones and expanding their capabilities.

New GPUs come out all the time. New phones come out (if you count all the manufacturers) all the time. We do not need to always buy the new one.

Current open weight models < 20B are already capable of being useful. With even 1K tokens/second, they would change what it means to interact with them or for models to interact with the computer.

To run Llama 3.1 8B locally, you would need a GPU with a minimum of 16 GB of VRAM, such as an NVIDIA RTX 3090.

Talas promises a 10x higher throughtput, being 10x cheaper and using 10x less electricity.

Looks like a good value proposition.

You obviously don't believe that AGI is coming in two release cycles, and you also don't seem to have much faith in the new models containing massive improvements over the last ones. So the answer to who is going to pay for these custom chips seems to be you.

I'm guessing this development will make the fabrication of custom chips cheaper.

Exciting times.

Probably the datacenters that serve those models?

Almost all LLM companies have some sort of free tier that does nothing but lose them money.

Hey, Can you please point out explain the inaccuracies in the article?

I had written this post to have a higher level understanding of traditional vs Taalas's inference. So it does abstracts lots of things.

Arguably DRAM-based GPUs/TPUs are quite inefficient for inference compared to SRAM-based Groq/Cerebras. GPUs are highly optimized but they still lose to different architectures that are better suited for inference.

The way modern Nvidia GPUs perform inference is that they have a processor (tensor memory accelerator) that directly performs tensor memory operations which directly concedes that GPGPU as a paradigm is too inefficient for matrix multiplication.