At the end he write the setup cost him $20, but the display alone sells for $50 (from the amazon link he provided). I'm assuming he had a bunch of the components already, but that's not really a fair cost comparison.
voidUpdate 43 days ago [-]
I'm guessing that's a mistake in the article, in the video he says the setup costs $100
geerlingguy 43 days ago [-]
I wrote the blog post a couple months back, and was considering the parts for the "computer" (Pi and adapter board alone) in that $20 estimate—the V3 version of the Pico Micro Mac is an additional $6.
But I'm assuming in that setup you have a VGA-capable monitor on a shelf somewhere; not everyone does, of course.
In the video I mention the all-in cost, accounting for the monitor, keyboard, mouse, power adapters, etc.
This isn't a practical setup by any means, but at least you wind up with a neat couple bits of hardware that could be repurposed once you get bored of it!
tokyobreakfast 43 days ago [-]
I'd love to see this shoved into a Mac SE or Classic chassis with a replacement 9" LCD to match. Jeff, if you're reading this, make it happen lol.
The old Macs really were the perfect form factor for a compact desktop computer—you saw them in every bedroom in every 1990s sitcom.
Are there any good options these days that are smaller than a 24" all-in-one?
keyringlight 43 days ago [-]
Something I wonder about is whether the next few years will see a (small) fashion trend towards 'dumb PCs' similar to how there's a small group of people that prefer simple/feature/dumb phones. There's a number of factors within the PC space now that could see a PC with limited capabilities or primarily offline find its niche. Along with that, having a distinct form to set it apart from regular computing devices would be interesting, and Apple has a lot of them especially from the G3/G4 era.
pedrocr 43 days ago [-]
There seem to be some 15 inch all-in-ones but these days if what you want is a small form factor the answer is surely a laptop. Even if you're just going to keep it on the same desk forever that's what you'd get if you want 15 inch or smaller.
mbreese 43 days ago [-]
I could see a “portable” all in one being successful. Something closer to the first Mac where it had a handle in the back with a built in screen. In the 10-14” screen range. Back in the day, my mom had an internet appliance (light browsing and email only) which was close to what we’re taking about. She loved it.
You’re of course looking at all laptop parts, but the form factor would be part of the appeal. Then again, an iPad dock would also probably cover this form factor for about the same cost.
numpad0 43 days ago [-]
If this can generate VGA signal, it can also generate driving signals to control the original CRT too. Monochrome CRTs especially don't have fixed pixel counts, you can feed 4K240 signals if you want. It takes an analog circuit designer to pull off though.
deltarholamda 43 days ago [-]
>The old Macs really were the perfect form factor for a compact desktop computer
For certain types of work, they are excellent. I used an SE/30 as a dedicated writing and light programming machine for several years. It presents a friendly face, and the intimacy of the small screen is nice.
The small screen discourages distraction, though the small resolution was a bit of a chore while programming (lots of scrolling).
I'd like to see a toaster Mac-style box, perhaps with a slightly bigger screen, say 12", and with a decent resolution.
itomato 43 days ago [-]
You can build an SE or Se/30 on a new PCB with a replacement transparent case and analog board.
I think he is 3d printing a 1/2 size classic Mac chassis for the oi2040 rig
geerlingguy 43 days ago [-]
The transparent case from MacEffects is amazing, but almost always out of stock :(
pjmlp 42 days ago [-]
Not in European origin sitcoms.
noumenon1111 41 days ago [-]
ZX Spectrum?
TomMasz 43 days ago [-]
There's a really small form-factor Mac clone based on the pico-mac on a Pi RP2040. Only available in kit form after Apple complained.
> Only available in kit form after Apple complained.
That's several levels of disgusting. But then again, Apple long ago lost touch with the people that put them on the map in the first place.
mmmlinux 43 days ago [-]
If you don't protect your trademarks you lose them. Could be worse, if this was Nintendo there'd be a hit squad out.
jacquesm 43 days ago [-]
They could have just come to an agreement, that way it would not lead to trademark dilution.
vardump 43 days ago [-]
I wonder why he didn't use a RP2350, it costs practically same as the older RP2040. That way it could have 450 kB or so system RAM, enough to play around with some old productivity software.
But I'm assuming in that setup you have a VGA-capable monitor on a shelf somewhere; not everyone does, of course.
In the video I mention the all-in cost, accounting for the monitor, keyboard, mouse, power adapters, etc.
This isn't a practical setup by any means, but at least you wind up with a neat couple bits of hardware that could be repurposed once you get bored of it!
The old Macs really were the perfect form factor for a compact desktop computer—you saw them in every bedroom in every 1990s sitcom.
Are there any good options these days that are smaller than a 24" all-in-one?
You’re of course looking at all laptop parts, but the form factor would be part of the appeal. Then again, an iPad dock would also probably cover this form factor for about the same cost.
For certain types of work, they are excellent. I used an SE/30 as a dedicated writing and light programming machine for several years. It presents a friendly face, and the intimacy of the small screen is nice.
The small screen discourages distraction, though the small resolution was a bit of a chore while programming (lots of scrolling).
I'd like to see a toaster Mac-style box, perhaps with a slightly bigger screen, say 12", and with a decent resolution.
I think he is 3d printing a 1/2 size classic Mac chassis for the oi2040 rig
https://blog.1bitrainbow.com/pico-mac-nano/
That's several levels of disgusting. But then again, Apple long ago lost touch with the people that put them on the map in the first place.
Edit, this isn't the one I read but looks like the idea is older than I thought as someone was doing it in 2015:
https://www.randomorbit.co.uk/?p=904
https://arstechnica.com/apple/2025/06/new-filament-lets-you-...
https://spritesmods.com/?art=minimacplus&page=7
I dont want to belittle the authors work, but I would call this "building custom hardware for a pico-Mac project."