I've been driving roundabouts for decades, and think they're great - they really help with traffic flow. I've never found them confusing.
I had to drive this specific Kirkland roundabout the other day, and ended up missing my offramp and going in completely the wrong direction. It's the most confusing roundabout I've ever seen.
faxmeyourcode 1 hours ago [-]
A town I grew up in went absolutely crazy with roundabouts over the last 10 years or so. They built them everywhere. Most are pretty straightforward and they simplify traffic a ton but there were some bad design choices made.
There are accidents here almost every week and when an out of towner comes off the interstate to get some gas at Sam's Club (where I used to work) I had to try and explain to them how to get back onto the interstate...
I might try to clone this project idea, it was fun to play!
- there should be a gas pedal and a brake, rather than the car going forward at a constant speed unless I hit the brakes.
- the car should go straight, unless I turn. if I don't do anything near the exit of a roundabout, sometimes the "default" behavior is to exit the roundabout, sometimes it's to turn and continue within the roundabout.
frustration with the last point was enough for me to give up trying to play it. I'm sure the LLM that vibe-coded this thinks the controls make perfect sense, though.
in general:
is this trying to make a point of some kind about the design of the interchange? the "Inspired by online discussions of the Kirkland roundabouts" text sort of hints at that but it's unclear how.
is the point that it's overly complicated? or is the point that it's actually not that complicated, in response to people criticizing it? I can imagine it going either way...but the poor controls mean that it's not really effective at making either point.
different roundabout / intersection types would make this much more interesting. I've driven through the "diverging diamond" interchange of I-5 in Lacey [0] before, and it was a bit confusing the first time but now doesn't seem any more complicated than any other busy highway intersection. or, add a before & after comparing the old Kirkland interchange design to the new roundabout.
I rather agree. The layout actually looks pretty straightforward, but the controls make it annoyingly hard.
Though, in real life, people often don't look at the road markings - possibly even more true in America, where people are perhaps less familiar with the roundabout concept - and general directions of traffic flow is an issue. Perhaps driving this particular roundabout in real life might indeed turn out to be as annoying as this game is to play.
(There are a couple of straightforward-looking ones near me that, in practice, are almost impossible during busy times in specific directions. Even if your car is powerful enough to zip onto the roundabout in a tiny gap without there being a crash, now you have to not crash while making it turn...)
WalterBright 2 hours ago [-]
There's one installed a few years ago north of it where 132nd goes under the freeway. It used to have 2 lights to get through under the freeway. Now there are 2 roundabouts. I never have to wait anymore. It's a big win.
fimoreth 1 hours ago [-]
Agree, really thankful for those
GauntletWizard 1 hours ago [-]
Yes, because nobody goes that way anymore - It's too much of a time sink, significantly because you never end up where you want to go. Instead the real crossing points got even more crowded, or were until this abomination got installed.
Thankfully, I literally sold my house because of it, and my timing was good and I got out before prices dropped.
The linked ones, also called "magic roundabouts", are roundabout rings made out of roundabouts. In particular, you can take them clockwise or anticlockwise - it is a ring of roads connected by mini roundabouts. Even just the road sign gives you a headache!
Having been exposed to the idea for over a decade, I still don't know instinctively how to navigate them.
pacbard 3 hours ago [-]
The figure-8 central design makes this roundabout not a real roundabout. The challenge is that the entry and exit points are at the tightest part of the curve, making ingress and egress kind of weird. It looks like they did it because of space constraints on the bridge. What I find weird is the tightness of the on/off ramp, which share a very small part of the central lanes. In a traditional circle, they are spaced more apart, making exiting and entering smoother.
If it were a regular 2-lane traffic circle, it wouldn't be too difficult to navigate.
Personally, I find multiple-lane traffic circles (4+) to be more difficult to navigate, mostly when some people in the center lanes pull a fast right turn across all lanes of traffic. Otherwise, much better than traffic lights at keeping traffic moving or first-come, first-served stop intersections when people don't really stop or sit there waving you through.
dwd 3 hours ago [-]
That is a very basic roundabout. I was expecting by "magic" that you would have to go round some part in reverse (clockwise for US left-hand driving). This is nothing compared to the original "magic" roundabout of Swindon, Wiltshire.
This interchange might have been better off using a diverging diamond interchange layout [1]. While not a roundabout they are "magic" and we should use them more often.
They just look confusing because at some point you are effectively driving on the wrong side of the road, but are extremely efficient. My daily commute includes one that cuts a few minutes off what it once took to negotiate the previous traditional interchange.
We have one of those diverging diamond ones in the general area too (at the I90/SR18 junction). It's interesting to drive through until you get used to it.
mikestew 2 hours ago [-]
I hit that one a few weeks ago, having apparently not been that way in quite a while. I’m down with some roundabouts, but that intersection definitely kept me in my toes.
bobthepanda 2 hours ago [-]
it does note that it's satire. a lot of drivers in America have reflexive dislike of roundabouts.
this one probably is not good for a DDI because it is also supposed to be a bus interchange for a BRT project, and the buses will stop at the roundabout level.
dwd 2 hours ago [-]
Probably an instance where busses need their own level/ramps.
madrox 4 hours ago [-]
I used the roundabout the game is modeled after the other day. This is at the freeway exit used to get to the Costco AND downtown in Kirkland. I've seen pileups here for no reason. It's insane.
To be fair, I'm not sure there's a good solution. The real problem is the volume of traffic and that it dumps onto two lane roads at the edges of this roundabout. To really fix things you need to give people other exits to use.
jimbobimbo 56 minutes ago [-]
The new 85th St & I-405 interchange is horrible. I took it twice and both times it's too stressful and takes much longer to get off 405.
maest 4 hours ago [-]
I'm all for hating bad infrastructure, but this roundabout seems pretty straightforward? Maybe it's different when you're actually driving on it, but from a topdown view it's clear it's a central roundabout with some extra sidelanes to avoid the roundabout if you're immediately turning right.
Freedom2 3 hours ago [-]
Talking to my American colleagues, they're often perplexed by roundabouts and don't really understand how they fundamentally work. They're also incredibly stubborn when it comes to convincing them that it helps with traffic flow immensely versus a 4 way stop sign.
throwaway173738 1 hours ago [-]
When you’re walking the stop sign stops traffic for you so it’s a lot nicer. I’ve found that even with a marked crosswalk people ignore you if they’re not forced to stop.
1 hours ago [-]
dafelst 2 hours ago [-]
I drove on this for the first time yesterday, once from 405 S to 85th W, then back on 85th E and 405 N. Super easy, the lanes are fairly nicely signed and there is ample signage. No issues at all.
loeg 2 hours ago [-]
Have you done the I-90 <-> SR 18 interchange out by Preston yet?
fimoreth 1 hours ago [-]
Love it, you’ve got to do 132nd street next. Trying to exit south bound during rush hour is delightful
dlcarrier 2 days ago [-]
I swear if the US could build regular roundabouts, converting an intersection would make the accident rate go down, instead of up.
AngryData 3 hours ago [-]
From what I understand roundabouts make accident rate go up, it is the severity of accidents that goes down which probably still a positive.
That said I have yet to drive through a roundabout that I think improved an intersection in any meaningful way. Half of them work as intended but I find them less pleasant to drive through, the other half are just horribly designed and often have semitrucks go through them when they aren't really large enough for that.
brudgers 8 hours ago [-]
They can and do build them.
The problem is that at intersections the normative behavior of American drivers is to queue and wait for your turn. Roundabouts assume a different behavior based on jumping the line.
Thus there is a lot of unpredictability regarding other drivers due to generations of driving patterns developed in diverse regional driving cultures...many of which are distinctly not-urban.
In addition, this roundabout is part of an Interstate Highway interchange. The US Interstate system is at a scale that doesn't occur elsewhere. It is transcontinental.
markdown 3 hours ago [-]
Perhaps they need to start building more roundabouts on smaller intersections, and improve education in driving schools. Then give it time (decades).
brudgers 2 hours ago [-]
The US has been building roundabouts for about 30 years.
It has a lot of intersections.
Reconfiguring intersections is expensive and disruptive. Stop signs and traffic lights take less space and are often the simplest thing that might work.
2 hours ago [-]
3 hours ago [-]
cloverich 1 hours ago [-]
I love this roundabout, we live down the street from it. People around here drive comically bad, mostly from what i suspect is simple inexperience (many new drivers), with a surprising side of entitlement (super rich area). Together, its become my favorite experience to see all the ways people fail to navigate this wild "roundabout".
And yet it still mostly works, and is loads faster than the former lights that were there before, so i suspect it will be a success in most eyes once everyone adapts.
For additional fun, check out the sticker price on this intersection overhaul (which includes much more than the round about).
In my town of Shrewsbury PA we have a diverging diamond traffic pattern(it's sorta like a figure 8). I have no issue with it tho I have seen a car accident or two there. Roundabouts are simple and so is the diverging diamond.
The adjoining roads have a large speed differential. The runoff areas around this project do not appear as if designed with this in mind. I predict a few horrible accidents and some hamfisted redesigns.
The local news has a ground level view of this project:
I'm a huge roundabout fan, but this does indeed look nasty. Seattle area driving in general is pretty bad. There's an exit on the 5 in downtown Seattle that's on the far left lane (Seneca street I believe) that feels like putting your life on the line every time you need to take it.
throwaway173738 1 hours ago [-]
Bonus points if you’ve found all the express lane on ramps.
shawn_w 3 hours ago [-]
There are multiple left lane exits (and onramps!) on I5 in downtown Seattle. Fun times.
Rendered at 04:39:03 GMT+0000 (Coordinated Universal Time) with Vercel.
I had to drive this specific Kirkland roundabout the other day, and ended up missing my offramp and going in completely the wrong direction. It's the most confusing roundabout I've ever seen.
Take this similarly confusing double-roundabout for example https://maps.app.goo.gl/VTSrSWsBGnsYyzKU6
There are accidents here almost every week and when an out of towner comes off the interstate to get some gas at Sam's Club (where I used to work) I had to try and explain to them how to get back onto the interstate...
I might try to clone this project idea, it was fun to play!
They also proposed a peanut style roundabout with a *train track going through it* that thankfully has not been built yet https://media.conwayarkansas.gov/media/documents/project/85/...
- have a mute button for the background music.
- there should be a gas pedal and a brake, rather than the car going forward at a constant speed unless I hit the brakes.
- the car should go straight, unless I turn. if I don't do anything near the exit of a roundabout, sometimes the "default" behavior is to exit the roundabout, sometimes it's to turn and continue within the roundabout.
frustration with the last point was enough for me to give up trying to play it. I'm sure the LLM that vibe-coded this thinks the controls make perfect sense, though.
in general:
is this trying to make a point of some kind about the design of the interchange? the "Inspired by online discussions of the Kirkland roundabouts" text sort of hints at that but it's unclear how.
is the point that it's overly complicated? or is the point that it's actually not that complicated, in response to people criticizing it? I can imagine it going either way...but the poor controls mean that it's not really effective at making either point.
different roundabout / intersection types would make this much more interesting. I've driven through the "diverging diamond" interchange of I-5 in Lacey [0] before, and it was a bit confusing the first time but now doesn't seem any more complicated than any other busy highway intersection. or, add a before & after comparing the old Kirkland interchange design to the new roundabout.
0: https://wsdot.wa.gov/travel/traffic-safety-methods/diverging...
Though, in real life, people often don't look at the road markings - possibly even more true in America, where people are perhaps less familiar with the roundabout concept - and general directions of traffic flow is an issue. Perhaps driving this particular roundabout in real life might indeed turn out to be as annoying as this game is to play.
(There are a couple of straightforward-looking ones near me that, in practice, are almost impossible during busy times in specific directions. Even if your car is powerful enough to zip onto the roundabout in a tiny gap without there being a crash, now you have to not crash while making it turn...)
Thankfully, I literally sold my house because of it, and my timing was good and I got out before prices dropped.
The linked ones, also called "magic roundabouts", are roundabout rings made out of roundabouts. In particular, you can take them clockwise or anticlockwise - it is a ring of roads connected by mini roundabouts. Even just the road sign gives you a headache!
Having been exposed to the idea for over a decade, I still don't know instinctively how to navigate them.
If it were a regular 2-lane traffic circle, it wouldn't be too difficult to navigate.
Personally, I find multiple-lane traffic circles (4+) to be more difficult to navigate, mostly when some people in the center lanes pull a fast right turn across all lanes of traffic. Otherwise, much better than traffic lights at keeping traffic moving or first-come, first-served stop intersections when people don't really stop or sit there waving you through.
This interchange might have been better off using a diverging diamond interchange layout [1]. While not a roundabout they are "magic" and we should use them more often.
They just look confusing because at some point you are effectively driving on the wrong side of the road, but are extremely efficient. My daily commute includes one that cuts a few minutes off what it once took to negotiate the previous traditional interchange.
[1] https://en.wikipedia.org/wiki/Diverging_diamond_interchange
this one probably is not good for a DDI because it is also supposed to be a bus interchange for a BRT project, and the buses will stop at the roundabout level.
To be fair, I'm not sure there's a good solution. The real problem is the volume of traffic and that it dumps onto two lane roads at the edges of this roundabout. To really fix things you need to give people other exits to use.
That said I have yet to drive through a roundabout that I think improved an intersection in any meaningful way. Half of them work as intended but I find them less pleasant to drive through, the other half are just horribly designed and often have semitrucks go through them when they aren't really large enough for that.
The problem is that at intersections the normative behavior of American drivers is to queue and wait for your turn. Roundabouts assume a different behavior based on jumping the line.
Thus there is a lot of unpredictability regarding other drivers due to generations of driving patterns developed in diverse regional driving cultures...many of which are distinctly not-urban.
In addition, this roundabout is part of an Interstate Highway interchange. The US Interstate system is at a scale that doesn't occur elsewhere. It is transcontinental.
It has a lot of intersections.
Reconfiguring intersections is expensive and disruptive. Stop signs and traffic lights take less space and are often the simplest thing that might work.
And yet it still mostly works, and is loads faster than the former lights that were there before, so i suspect it will be a success in most eyes once everyone adapts.
For additional fun, check out the sticker price on this intersection overhaul (which includes much more than the round about).
https://www.youtube.com/watch?v=DeFY9u69tkE
The adjoining roads have a large speed differential. The runoff areas around this project do not appear as if designed with this in mind. I predict a few horrible accidents and some hamfisted redesigns.
The local news has a ground level view of this project:
https://www.youtube.com/shorts/jlPMB7c0RyQ